Now if you haven’t installed the Jungo USB drivers, then you can simply plug in your AVRISP MKii, but when it asks whether you wish to install the drivers for it automatically or manually, choose MANUAL. It can be found at however, for some reason my machine did not like this version, so I found another version that appeared to be tailored specifically for the AVRISP MKii here: If by chance you had already installed AVR Studio and the Jungo Drivers, don’t worry, I’ll show you how to replace it further down.ĭownload the LibUSB-Win32 driver and extract it somewhere temporary. You can either use one of the other, not both at the same time. It installs the “Jungo USB” driver which is not compatible with AVRdude (which the Arduino IDE uses). DO NOT install the Atmel AVR Studio software suite.If anyone spots an error, please let me know. So here goes For this particular tutorial, I’m using a breadboarded Mega328P with the Atmel AVRISP MKii with Arduino IDE 0023 on a Windows 7 machine. I found many threads with tips on doing this and that, but none had all the missing pieces nor helped walk a newcomer through all the little adjustments that had to be made in order to make this happen (at least for a newbie like myself). After two days of searching literally hundreds of forums, blogs and spec sheets, I was finally able to get my Atmel AVRISP MKii to work with the Arduino IDE and upload sketches to my breadboarded Mega 328P IC. Hello all, since I’ve been helped by so many knowledgeable and generous people here, I wanted to give back a little on what I’ve learned.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |